Hand Operated Manual Hydraulic Pump 700 Bar Dual Stage High Pressure 700–2700cc Single Acting

PICK YOUR OIL TANK SIZE
700cc — Lightest option. Best for jobs where you move the pump frequently or work in tight spaces. Less weight to carry, easier to maneuver.
1200cc — The balanced choice. More capacity without significantly adding bulk. Ideal for moderate cycle work.
2700cc — Built for longer continuous jobs. Fewer stops to refill. Better suited for high-cycle applications or when you're running multiple tools back to back.
Same pump. Same pressure. You choose based on your workflow.

THE HANDLE WAS DESIGNED FOR A FULL SHIFT, NOT JUST A FEW STROKES
PVC rubberized lagging grip. Ergonomic profile. Stays secure with oily or wet hands. If you've ever finished a job with a sore palm from a poorly designed handle, you'll notice the difference immediately.

WHY OPERATORS KEEP COMING BACK TO THIS PUMP
Most hand pumps feel cheap after the first job. Handles flex. Valves drip. Seals give out under real pressure. This one doesn't. The cylinder is precision-ground to tight tolerances, the sealing surface is machined smooth, and the materials are heat-treated for hardness. It's built to be used hard, repeatedly, for a long time.

THE PRESSURE COMES IN TWO STAGES — HERE'S WHY THAT MATTERS
On the low-pressure stage, each stroke delivers 13cc of oil — your cylinder travels fast, your tool closes quickly. As resistance builds, the pump shifts automatically into high-pressure mode, delivering 2.3cc per stroke at up to 700 Bar. You don't adjust anything. You just keep pumping, and the pump does the work of reading the load.
Fast when speed matters. Powerful when force matters. All in one pump.

THE RELIEF VALVE IS SIMPLER THAN YOU THINK
Clockwise = pressure on. Counterclockwise = pressure off.
That's genuinely all there is to it. No switches, no solenoids, no settings to configure. Operators who've never touched a hydraulic pump before figure it out in under a minute. Operators who've used them for years appreciate that it never surprises them.

ONE THING YOU MUST DO BEFORE EVERY USE
Unscrew the bleed nut.
It sounds small, but skipping this step seals the oil tank and kills your pressure build-up immediately. Unscrew it before pumping, screw it back when you're done. Thirty seconds make the difference between a pump that works and one that doesn't.

FITS YOUR TOOLS. RIGHT NOW.
Standard female connector. Fits your existing hydraulic tools without adapters or modifications. Connect, bleed, pump, work, release. The whole sequence takes less time to do than it does to read about.
Max Pressure: 700 Bar / 10,000 PSI
Output per stroke: 2.3cc (high) / 13cc (low)
Oil Capacity: 700cc / 1200cc / 2700cc
Weight: from 9.6 kg
Drive: Manual / Hand Operated